1 |
Investigations on Laser Based -Powder Feed Type-Direct Energy Deposition (LAMDED) for Additive Manufacturing of Components in Space Applications |
VSSC |
Dr.V.S.Sooraj |
|
Ongoing |
2 |
Computational and Experimental Investigations on a Combined Nonlinear Vibration Absorber Energy Harvester System |
DST |
Santhosh B, Amrita Viswapeeth, I R Praveen Krishna (Mentor) |
|
Ongoing |
3 |
Effect of Hydrogen blending in natural gas |
Oil India Limited, Duliajan |
Dr.Prathap C |
|
Ongoing |
4 |
Development of Mathematical Model for Dynamic Stress and Transmission Error Prediction of High Speed Spur Gear Mesh |
DRDO |
Dr.Praveen Krishna I R |
|
Ongoing |
5 |
Development of fast response TDLAS temperature sensor for high temperature application |
SERB-DST |
Dr.Rajesh Sadanandan |
Dr.Satheesh K |
Ongoing |
6 |
Investigations on Laser Based -Powder Feed TypeDirect Energy Deposition (LAM-DED) for Additive Manufacturing of Components in Space Applications |
IIST/ISRO |
Dr.V.S.Sooraj |
|
Ongoing |
7 |
NH3-H2 Non-premixed Combustion |
DST/INT/DAAD |
Dr.Rajesh Sadanandan |
Dr.Satheesh K |
Ongoing |
8 |
Performance and Instability Analysis of Methane Oxygen Combustion using shear coaxial injector |
LPSC Valiamala |
Dr.Aravind V |
|
Ongoing |
9 |
Implicit large Eddy Simulation of Jets |
VSSC |
Dr.Manoj T Nair |
|
Ongoing |
10 |
Experimental and Numerical Investigation of Direct Contact Condensation of GCO2 / Steam in LN2 |
ASRG-ISRO |
Dr.Prathap C |
|
Ongoing |
11 |
Development of Mathematical Human Thermal Behavior Model for a Reference Indian Subject linked to Human space flight program of HSFC. (Gaganyaan Projects) |
HSFC |
Dr.Shine S R |
|
Ongoing |
12 |
Analysis of Thruster Plume Behaviour in Vacuum using DSMC Method |
ASRG |
Dr.Shine S R |
|
Ongoing |
13 |
Supersonic combustion of isrosene behind two strut configuration |
VSSC |
Dr.Aravind V |
|
Ongoing |
14 |
Cold Flow Characterization of a Dual Throat Nozzle (DTN) based Tri-Propellant Engine Propulsion System. |
LPSC Valiamala |
Dr.Deepu M |
|
Ongoing |
15 |
Three-dimensional DSMC (Direct simulation montecarIo) simuIation for satellite thrusters |
LPSC Valiamala |
Dr.Shine S R |
|
Ongoing |
16 |
Rocket Injector spray studies |
IIST |
Dr. V. Aravind |
|
Completed |
17 |
Simulation of nonequilibrium hypersonic flow in a shock tunnel nozzle |
IIST/ISRO |
Dr.Satheesh K |
Dr.Devendra Ghate |
Completed |
18 |
Development and Realization of a 3-D RANS CFD Code |
IIST |
Mr. Pankaj Priyadarshi |
|
Completed |
19 |
Development of an in-house CFD code for the performance prediction of cryogenic and semicryogenic engines |
IIST/ISRO |
Dr.Deepu M |
|
Completed |
20 |
Molecular Dynamics Studies on Fracture of Bio-Composites |
IIST |
Dr. Anup S, Dr. Bijudas C.R, Dr. Ramesh Narayanan-VSSC, Shri. Sudarsan Rao-VSSC |
|
Completed |
21 |
Hydrodynamic instabilities in solid rocket motors |
IIST |
Dr.Manu K V |
|
Completed |
22 |
Investigation of deployment of antenna for space application |
|
Ms. Roshina Babu, Prof. Kurien Issac |
|
Completed |
23 |
Laser sheet droplet sizing for spray studies |
IIST/ISRO |
Dr. V. Aravind |
|
Completed |
24 |
Machining studies on aluminium alloy with silicon carbide particles reinforced metal composites(MMC) |
IIST |
Dr.K. Jayakumar |
|
Completed |
25 |
Development of desktop type FDM based multi-jet 3D polymer printing system and allied research |
IIST/ISRO |
Dr. V. S. Sooraj,Dr.Praveen,Mr. Pradeep |
|
Completed |
26 |
Optimisation of regenerative cooling channels of liquid rockets engines. |
IIST/ISRO |
Dr.Shine S R |
Mr.J C Pisharady |
Completed |
27 |
Investigation of micro-patterning of surface in aerospace applications |
IIST |
Dr.Sooraj V S |
|
Completed |
28 |
Development of experimental rover and investigation of mobility and approaches for local and global motion planning on uneven terrain |
IIST/ISRO |
Dr. K. Kurien Issac |
|
Completed |
29 |
Non-linear energy harvester |
DST-TARE |
Dr.Praveen Krishna I R |
|
Completed |
30 |
Investigation of traversability of wheeled rovers on uneven terrain |
IIST |
Mr. Sam Noble, Prof. Kurien Issac |
|
Completed |
31 |
Experimental investigation of laminar burning velocity premixed ISROSENE/ AIR/ OXYGEN mixtures using freely expanding spherical flames |
IIST/ISRO |
Dr. C. Prathap |
|
Completed |
32 |
Strut injection for scramjet combustion |
IIST/ISRO |
Dr.Aravind V |
|
Completed |
33 |
Whirling beam experiments for flapping wing Micro Aerial Vehicles (MAVs) |
IIST |
Prof. Kurien Issac, Dr. G. Rajesh |
|
Completed |
34 |
Experimental and Numerical study of stationary flat flames |
IIST/ISRO |
Dr. C. Prathap |
|
Completed |
35 |
Effect of variation in Biogas fuel composition on the flame stability and pollutant emissions under practically relevant conditions |
SERB-DST |
Dr.Rajesh Sadanandan |
|
Completed |
36 |
Multi-objective, Multi-disciplinary design optimization of a semi-ballistic Re-entry vehicle using high fidelity heat flux Estimation |
IIST |
Mr. Pankaj Priyadarshi |
|
Completed |
37 |
Studies on Crack propagation in composites by Micro Raman spectroscopy |
IIST/ISRO |
Dr. S. Anup |
|
Completed |
38 |
To study the effect of real gas on the aerodynamic coefficient and heat transfer coefficients of re-entry module configurations |
IIST |
Mr. Pankaj Priyadarshi |
|
Completed |
39 |
Performance characterization and development of numerical model for Cavitating Venturi |
IIST/ISRO |
Dr. Pradeep Kumar P |
|
Completed |
40 |
Design of interplanetary trajectories for specified planetary arrival condition |
IIST |
Dr. R. V. Ramanan |
|
Completed |
41 |
Numerical simulation of turbulent reacting flows in semi cryogenic and tri- propellant engines. |
IIST |
Dr. M. Deepu, Dr. A. Salih |
|
Completed |
42 |
Structural Reliability of thin Cylindrical and Spherical shells used for Aerospace Structures |
IIST/ISRO |
Dr.Arun C. O |
|
Completed |
43 |
Studies on secondary injection to an expanding supersonic cross flow |
IIST/ISRO |
Dr. Rajesh Sadanandan |
|
Completed |
44 |
Modelling and Development of N2O4(Oxidant used in rocket engines)Scrubber system |
IIST/ISRO |
Dr.A Salih,Dr.K Prabhakaran, Kuruvila Joseph |
|
Completed |
45 |
Assessment of machining characteristics of ablative materials |
IIST/ISRO |
Dr. Chakravarthy, Dr. V. S. Sooraj, Mr. Mohankumar (VSSC) |
|
Completed |
46 |
Latent and Sensible heat thermal storage system for medium and high temperature CSP applications |
IIST-Fasttrack |
Dr. Manu K V |
|
Completed |
47 |
Mixing Enhancement in Supersonic Combustors Using Pylon-Cavity Flame Holder |
IIST-Fasttrack |
Dr. Rajesh Sadanandan |
|
Completed |
48 |
Investigation of wavy micro channel flow with nano fluids |
IIST/ISRO |
Dr.Shine S R,Dr. V S Sooraj ,Dr.Rajesh S,Mr.Deepak Kumar Agarwal |
|
Completed |
49 |
High- Speed unsteady flow past spiked blunt bodies |
IIST-Fasttrack |
Dr. Manoj T. Nair |
|
Completed |
50 |
Influence of Compressibility and Stream wise Pressure gradient on Film cooling performance |
IIST/ISRO |
Dr. Shine S R,Mr. J C Pisharady |
|
Completed |
51 |
Design of autonomously walking humanoid robot |
IIST |
Prof. Kurien Issac, Mr. Sam K. Zachariah |
|
Completed |